Product Design &
Customization
Dispensing solutions does not have to be based on what is already in the market. At EV EnVenture, we can design your new product line based on your need and requirement. With our capability in development, design and manufacturing; we are here to help you meet any need.Starting with market and consumer insights, we guide you through every step of the process – from conception, R & D prototyping and testing to commercialization and deployment.
PRODUCT REQUIREMENT PHASE
- Design and features recognition
- 3D concept renderings
- SLA presentation models
ENGINEERING PHASE
- Tooling design analysis
- Finite element analysis
- Pilot tooling molded samples
PRODUCTION PHASE
- Quick production ramp up
- Production line automation
- Robust inspection system
Our designers & engineers will assist you in bringing your ideas from concept to completion.Contact us today to get started.
Seal Material Specification
Viton® / FKM
Fluorocarbon (Viton®) exhibits exceptional resistance to chemicals, oils, temperature extremes (-13°F to +446°F), low compression set, low gas permeability and excellent aging characteristics. Applications include: aircraft engines, automotive fuel handling systems, and chemical processing industries. FKM is also suitable for high vacuum applications. It is not recommended for exposure to ketones, alkalis, and Skydrol® fluids. Custom compounds are available with improved chemical and low temperature resistance.
Nitrile / NBR
Nitrile (Buna-N) is the most widely used elastomer due to its excellent resistance to petroleum products, operating temperature range (-40°F to +257°F) and one of the best performance-to-cost values. It’s an ideal material for aerospace, automotive, propane and natural gas applications. Special Hydrogenated Nitrile (HNBR) compounds can improve resistance to direct ozone, sunlight, and weather exposure while increasing temperature range to +300°F.
Ethylene-Propylene / EPDM
EPDM has outstanding resistance to heat, water and steam, alkali, mild acidic and oxygenated solvents, ozone, and sunlight (-40ºF to +275ºF); but it is not recommended for gasoline, petroleum oil and grease, and hydrocarbon environments. This popular rubber compound is usually the first choice for low torque drive belt applications.
Fluorosilicone / FVMQ
Fluorosilicone (-75º to +400ºF) combines the good high and low temperature stability of silicones with the fuel, oil, and solvent resistance of fluorocarbons. FVMQ is unparalleled for aerospace fuel systems, auto fuel emission control systems and to meet or exceed government, military, aerospace, automotive, industrial and commercial specifications. However, due to relatively low tear strength, high friction and limited abrasion resistance of these materials, they are generally not used in dynamic applications. They are also not recommended for exposure to brake fluids, hydrazine, or ketones.
Silicone / VMQ
In the Silicone family, you will find compounds which are superior as static seals in extreme temperature conditions. Standard compounds handle operating temperatures -85º to +400ºF. Silicone compounds are popular in food and medical applications because they are very clean and do not impart odor or taste. Special Phenyl silicones can be used down to -148°F.
Neoprene® / CR:
Neoprene (-40º to +250ºF) is reasonably priced and features good resistance to petroleum oils, ozone, sunlight and oxygen aging, relatively low compression set, good resilience and outstanding physical toughness. It is the preferred sealing material for the refrigeration industry because of its resistance to ammonia and Freon®.